Hi everyone Mags here with you today.
I've had great fun creating this project inspired by the theme tracks. As soon as I heard the theme I thought of the many countryside walks we have taken with family and friends. Sometimes over well worn paths, but sometimes going off the beaten track. On one such walk we discovered a ramshackle distressed looking shepherds hut with holes in the roof and crumbling walls, the textures were wonderful.
Recently I have been reorganising my creative space and wanted to have all my favourite supplies to hand. I love my PaperArtsy Minis and they live on my desk. As my collection has grown I needed a handy place to store and keep track of them. I always try to make my storage functional but also decorative. So I wanted to create a shabby stamp shack inspired by the shepherds hut for the stamps to live in.
I wanted my stamp shack to be distressed and grungy with lots of texture so I experimented with Grunge Paste and Rusting Powder along with some Crunchy Waxed Kraft Paper. I love the results and hope you will be inspired to give these techniques a go.
I try to reuse and recycle packaging whenever I can and this was the ideal project for that. I chose a laundry detergent pod box as my base and some corrugated cardboard for the roof base.
I tend to work in fairly limited colour palette with lots of neutrals and rust. I chose two Seth Apter Fresco Finish Chalk paints to combine with my rusty elements which were created using Grunge Paste. I wanted the project to have a natural earthy feel using subtle warm colours with some depth from the rust.
I chose to start the project by adding sturdy walls to my recycled detergent pod box. I used Grey Board (GB03) to create two side walls and two gable ends with points at the top to support the roof. I also cut two extra triangular pieces to match the top of the gable end. The Grey Board was very easy to glue to the recycled box using strong PVA glue, elastic bands and bulldog clips to kept the Grey Board in place whilst it dried.
To create an interesting first layer on the walls I used Matte Medium to adhere scraps of torn map pages. This included the distance table and index pages for variety. This layer will be mostly covered but it adds interest where it shows through. I completely covered the inside and outside of the box.
To create a cohesive look to the walls I used my mini brayer (PABRAY1) to add a random coat of PaperArtsy Fresco Finish Chalk Acrylic - Heavy Cream (FF203).
At this stage I wanted to add a little more colour so chose to brayer on a coat of PaperArtsy Fresco Finish chalk Acrylic - Gold Rush (FF204) I also used a stiff brush to add a little paint to bare areas.
I was happy with the map pages peeking through but I decided I wanted a lighter look to the walls. So I added a very thin coat of the Heavy Cream to knock the colour back a little.
Now that the main body of the building was complete and I was happy with the colour and amount of map pages peeking through the layers of paint, I set it aside to dry completely. I was looking forward to the next stage of the build, the textured and distressed roof.
I wanted the roof to my shabby stamp shack to be interesting and textured with a look of decay or damage. I love to strip back corrugated cardboard packaging and use it in projects, but I wanted more interest on this roof. My husband built a workshop at the bottom of our garden a few years ago and it has a cedar shingle roof which I love. With this in mind I decided to create something similar on my shack. The Crunchy Waxed Kraft Paper looked ideal and a great colour for the roof.
I began by cutting a panel of corrugated cardboard to fit over the top of the building with an extra 1.5cm overhang all the way around. The cardboard naturally bent at the top as I was measuring it, so this saved me having to score along the ridge. I distressed the panel in some areas by using a pokey tool or wooden skewer to remove the top layer of paper from the cardboard.
To highlight the texture of the exposed cardboard ridges I used a stiff brush to add a very light coat of Fresco Finish Chalk Acrylic-Heavy cream (FF203).
I like to add extra visual texture to the cardboard and mostly use text stamps for this as it works well. One of Seth Apter's first stamp sets for PaperArtsy was my choice (ESA04)
The long narrow stamp at the base of the set was ideal. I stamped in Ranger Archival Distress (Vintage Photo and Jet Black).
To create my roof shingles/tiles I found an easy way to mark out the squares on the Crunchy Waxed Kraft Paper (WKPA5) which also had the added bonus of adding a lighter edge to the tiles. I used my score board and bone folder to score at 1cm intervals along the waxed paper, turned it around and then repeated the scoring, thus creating squares.
The scored lines made it much easier to create a rough textured edge, I used a ruler as a guide and to tear against.
It was now time to glue the tiles onto the roof. I wanted gaps for the ridges and stamping to show and also a random effect to the tiles so I started at the bottom edge and worked my way up the roof. Extra strong PVA glue worked well as an adhesive, I only glued the top edge of the tiles to the roof so each one could lift at the base slightly. Once I was happy with the coverage I added ridge tiles to the top, these were just tiles folded in half and glued along the top edge of the roof.
So that the roof could be easily lifted off to reveal the stored stamps I needed to add some stabilising elements. My husband informed me that these are roof trusses! They sound complicated, but remember those two extra triangular gable tops that I cut from Grey Board ? Well those are the roof trusses. I had covered them with map pages and added paint as I did on the walls. It was easy to glue them to the underside of the roof making sure they sat just inside the gable walls when the roof was on. I must admit this is the most boring photo of the blog post, but it is necessary to show how to create the roof.
Once the roof trusses had dried and were secure I put the roof on the building, it looked good but I felt it need a bit of work to make it look weathered. Fresco Finish Chalk Acrylic - Heavy Cream to the rescue again. I used a very small stiff brush and dry brushed the paint on, it created the visual texture I wanted.
You can see in this picture how the torn edges of the waxed paper add texture and the dry brushing adds a weathered look.
I was very happy with my little shack at this point, the main body of the house looked good and the roof was full of textured elements, But I wanted more texture and some rust colour included on the walls. I considered adding Grunge Paste directly to the walls but being a very impatient crafter I didn't want to have to wait for the paste to dry on each wall before moving on to the next. So I decided to use a technique I have experimented with before. Grunge Paste and Rusting Powder on kitchen paper roll.
For this technique I always work on an old baking tray or plastic tray with raised sides, this stops any moisture from leaking. I laid 3 sheets of kitchen roll paper onto my baking tray and using a spatula, applied a layer of the PaperArtsy Grunge Paste (GP190) through a Seth Apter Stencil (Grate Full) by Stencil girl Products. You may notice that I have cut up the stencil to make it easier to use on small surfaces. This set was not easy to photograph as it was white on white, but hopefully you get the idea.
.
Whilst the Grunge Paste was still wet I sprinkled on some PaperArtsy Rusting Powder (RP45) making sure to cover all the paste. The Grunge Paste dries quite quickly so I was soon able to brush any excess Rusting powder from the paper towel and into a small container, I didn't want to waste any of this wonderful powder. Allowing the Grunge Paste to dry completely overnight makes it easier to brush off the last of the excess with a fan brush.
The next part of the technique is the most exciting and I always look forward to seeing the results. The excitement never fades no matter how many times I do this.
With the paper towels still in the tray, sprinkle some vinegar over the coated Grunge Paste. I tend to use inexpensive cider vinegar, but any vinegar works. I suggest working in a very well ventilated room as the vinegar and powder combo can be a little smelly. Leave the papers to develop and also dry overnight. Come back to fabulous rusty papers the next day.
If for any reason you don't get the results you wanted it may be because the vinegar evaporated too quickly and wasn't in contact with the powder for long enough. Just repeat this step and try to keep the tray in a cooler place. For the powder to rust it needs to be damp, and the acid from the vinegar speeds up the rusting process. So, bear in mind dry rusting powder won't rust, damp rusting powder will!
Once the papers are completely dry the separate layers (usually 3) can be pulled apart starting at the edges. This will give you lots of thin sheets and varying degrees of rustiness. Obviously the top layer will have all the chunky texture from the grunge paste, but the lower layers will have rust and interesting marks too.
Before I started to add the rusty texture to the walls of the shack I wanted to add some stamping for visual texture. The PaperArtsy Mini by Seth Apter (EM41) looked ideal.
The squares reminded me of a stone wall. I used my Ranger Archival Distress - Vintage Photo ink pad and added random stamping to all the walls. I love this Mini and I can see that it will become one of my favourites.
Once the paper towel layers were separated it was time to add the lovely grungy texture to the walls of my building. The paper tears easily so areas can be selected, or even single strips of the rusted texture. If you are nervous about just tearing into it, use a damp, fine paintbrush to mark out the area you wish to separate and whilst the paper is wet, just pull gently and it will tear along the damp edge.
When adding the rusty textured paper to the walls I concentrated on the corners, wrapping it around some corners for continuity. I didn't want to cover all my initial layers of map pages, paint and stamping. The paper towel adhered easily with matte medium which dried quite quickly and kept the matt/natural look of the building.
As you can see in the picture above, I also added some of the plainer rusty paper, this gave a more cohesive look again. To make the edges blend even more I stamped again using the Seth Apter Mini (EM41) but this time in Ranger Archival - Ground Espresso. This added more depth of colour too.
I was finally happy with the amount of texture on the building and the roof, but of course it needed some finishing touches such as a door and windows.
For the finishing touches of the shack I wanted something a little different. I could just stamp on a door and a couple of windows, but to me it deserved something a little different and more unusual. I still had some scraps of Grey Board left and also some of the waxed paper so combining the two seemed like a good idea.
I chose another Mini from Seth Apter (EM53) which to my eyes looked a little like a distressed window and door frame. I initially stamped using my Stazon (Black) ink pad but it was not as clear and deep as I wanted (I think my ink pad is getting a little old and needs re-inking). My next choices turned out to be far better. I stamped using PaperArtsy Fresco Finish Chalk Acrylic Midnight (FF123), Once that was dry I stamped over the top with my Ranger Archival (Jet Black). I wasn't too careful to exactly line up the two sets of stamping and this added an almost shadow effect.
To add dimension to the windows they were eventually going to be glued to grey board panels, but first I used a black marker to darken the edges of the grey board.
To make the window area stand out more against the frames I placed them on a soft stamping mat and used a ball tool to add pressure and change the colour of the waxed paper. It was easier to see the inside area of the window when the waxed paper was on top of white tissue.
Yet again my need for visual texture arose, so I stamped onto the window area using the stamp I'd used on the roof (ESA04). Finally I glued the windows onto grey board and Adhered them to the building with PVA glue. The door was finished with a rusty brad and then attached.
I realised that I wanted the roof to have a little rust too, so I glued on a few scraps of the rusty tissue paper towel.
I had great fun creating my Shabby Stamp Shack and I have lots of leftovers from the Rusting Powder/Grunge Paste technique as well as quite a few shingle tiles. Who knows I may build another shack, or even a small cart to house my growing collection of Infusions. I get a great buzz from recycling packaging and giving it a new use, so nothing is off limits. I was quite surprised that the Fresco Finish Chalk acrylics stamped onto the Crunchy Waxed Kraft Paper and didn't rub off at all, I will definitely be trying more techniques combining the two. I hope you enjoyed seeing how I created this project and it inspires you to have a go. If you don't need stamp storage a lot of the techniques could be used to recycle empty tin cans into paint brush storage.
Have fun and happy crafting
Mags
