Showing posts with label Aqua Duck Egg. Show all posts
Showing posts with label Aqua Duck Egg. Show all posts

Monday, 16 March 2026

Flip Flop Book with ESN {by Keren Baker}



I recently learned about the explorer, inventor and conservationist Jacques Cousteau and when I sat down to create this project, his inspiration teamed just perfectly with Sara Naumann's stamps and I created a somewhat unusual front cover to my Flip Flop book.







I would normally pick two main colours and add a pop of colour with one that's directly opposite on the colour wheel, but I wanted a tranquil marine theme and decided to leave the more bold colours alone.


I had lots of 'backgrounds' to complete, but I began with the final page, and this was just on a piece of White Board with lots of dry brushing and using PaperArtsy Fresco Finish Chalk Acrylics in Baltic Blue, China, Heavy Cream, Green Patina, Lawn & Duck Egg Blue.


I stamped out multiple images from the Mini 118 set with different coloured inks. I had this idea of making a focal point in a wreath using cut out images, but I really wished that I'd just left it like this and used this whole sheet as a background !


I wanted to use Grunge Paste in a couple of ways. I haven't stamped on it for quite some time. It's an easy technique that delivers high impact. You'll need a substantial substrate to add the Grunge Paste onto.


I used White board, (PaperArtsy have great packs of it). Spread the Grunge Paste in an even layer. The temptation will be to add a spray of water onto the stamp to help ease it out of the Grunge Paste but don't, as it'll make it more liquid-y and not show the stamp details up as well.


Just make sure that you clean your stamps straight after stamping with the Grunge Paste so you don't get it drying in the stamp crevices.


I also created a small piece that looked like the ridges on the sand when the tide has gone out. Leave them both to dry.


Sprinkle on your Infusions over the dried stamped piece; I used In The Navy and A Bit Jaded. As the Infusions have two different crystals that react with water at different rates, if you want more colour and less brown walnut crystal, you need to dry the piece once the desired colour has been achieved. I just used a heat gun to dry it off quickly.



I wanted to use multiple layers to open out for the book. Using translucent and clear surfaces would encourage people to look through and discover the other layers, so I dug out some acetate and Grafix Duralar. It's easy to stamp on one side using a permanent ink like Stazon and then use colour on the reverse.


For layering using acetate, add the colour that you want to be in the foreground first (on the reverse) and then add the other colours. This was supposed to be echoing waves as I wanted to add it over the Grunge Paste 'sand' layer.


Using the main image from Sara's Eclectica 59, I added the paint on the reverse. The Duralar has partial translucency and enough to be able to see a soft colour showing through from the back.
 

Having thought about Jacques Cousteau and his work in the oceans gave me the idea to have the front as an underwater mask.


I added another layer, putting one of the stamp set's quotes and adhering another stamped shell underneath.


You can see the soft effect that painting on the reverse gives.



Each layer opens upwards or outwards.






I used circles as much as possible, so there was a consistent theme. I echoed the 'bubbles' by using brads and eyelets.



I also used some metal tape to attach several of the elements to the book. If you closely at the photo, you can see some of the metallic shimmer spray that I sprayed over the top.


This was placed on the back; my failed focal element. It brightened up the back at least !
 
It would be easy to add in a few more flip/flop layers and have them left blank in order to add notes or photos. As Scrapbooking seems to be having a resurgence, maybe we should be printing off our photos once more!
I'd have liked to do more with the idea of looking through the layers, perhaps using a porthole styled frame and lots of layers.

It's a great way to add in texture and layers easily without having to plan too far ahead. Do give it a go !

Thanks for being here today,

Keren x



Monday, 9 March 2026

'Z' Fold Card with Zinski Art {by Martha Ponsanesi}


Hi everyone, it's Martha (@CraftingMarthawith you today, and I'm here to share with you a funny double Z fold card using some Zinski Art Stamps.




Looking through my stash, I found some Zinski Art Stamp Sets, specifically ZA06ZA13, and ZA40, and I got the idea to create something where all the elements from these stamp sets would be visible... and I almost succeeded! If you look closely, there's only one stamp missing, but other than that, I used them all on a single card :).



Having chosen these stamps with funky houses and  flowers, I thought of creating a sort of landscape background using PaperArtsy Fresco Finish Chalk Acrylics in shades of blue and green, used along with a 3" x 5" gel plate to create a sort of patchwork look and some found objects to add texture.


For the base of my card I chose PaperArtsy Fresco Finish Chalk Acrylics in Hint of Mint (FF87), Caribbean Sea (FF94), Aquamarine (FF153) and Aqua Duck Egg (FF199).


For the "Z" element of the card I chose PaperArtsy Fresco Finish Chalk Acrylics in Limelight (FF48), Slimed (FF137), Verdigris (FF191) and Parakeet (FF225).


Now we can fold the cardstock using the measurements shown in the picture. The blue piece measures 13 × 29 cm, and the green one measures 6 × 18 cm, with the small insert measuring 6 × 6 cm.


To add more interest to the background, I stamped some small circles from the Zinski Art Set 13 ( ZA13 ) tone on tone using Distress Oxide Ink.


And here is the card base assembled and ready for embellishments.
 

So far, I've used the PaperArtsy Fresco Finish Chalk Acrylics with the Gelli Plate, one of my absolute favorite techniques that I often use. But I also like Mattints, so for the stamped images, I grab some of my favourites Mattints: Glow (MT01), Fern (MT03), Shark (MT04), Dragonfly (MT07), The Pink (MT08), Greenstone (MT09), Ladybug (MT12), Mojito (MT13), Acid (MT14), High Viz (MT15), Bellflower (MT17) and Foxglove (MT18).



After stamping the various elements from the Zinski Art Stamp Set ZA06ZA13, and ZA40  onto white cardstock, I roughly cut them out.


I love colours, but since I’m not very skilled with traditional colouring techniques, I decided to colour the stamped elements in a very ‘free’ way. I placed drops of Mattint on an acrylic block and then pressed the previously stamped and roughly cut cardstock pieces onto it to pick up the colour. Because Mattint is a tinted glaze rather than an acrylic paint, it allows me to achieve nice, subtle results.


Once my image is mostly coloured, I can pretend to be a skilled artist and finally use a brush, even if only to add colour accents.


I have to say, I’m quite happy with how the cut-out images turned out.




Now that we have the card base and all the decorative elements, it’s time for the most fun part: assembling it all.


What I love about this structure is the possibility of having multiple layers for the embellishments, allowing you to create a sort of landscape.



This is the finished card. Seeing it so full of colours and elements makes me happy. I already love it when it’s closed, with the two houses and the sentiment, but when you open it: an explosion of colour and fun! :)







The beauty of these funky houses is that they can be 'shortened' and elements can be swapped between them, using this approach, you can make a fun, varied village scene.


I had so much fun creating this card and diving into this super colorful little village. I hope you enjoyed it with me… and did you spot which stamp I didn’t use? LOL

Have fun.
Martha xxx