Showing posts with label Olive. Show all posts
Showing posts with label Olive. Show all posts

Monday, 12 October 2026

SPICE JUG SLEEVE with EMW {by Floss Nicholls}


Hello everyone

Floss from flossWORKSHOPart here with you today and I'll be sharing with you how to create cone shaped jugs using Mags Woodcock's rubber stamp set EMW004 combined with her stencils PS516 and PS517 that were launched earlier this year.

These cute little jug 'sleeves' fit perfectly over spice jars so you can pop brushes or other tall items in them as well as being able to use the jar to hold water and use for a table vase with fresh flowers...I think they look great with some of my brushes in...they will definitely look the part in my workshop.

I decided to use infusions with the stencils and stamped blank tissue paper to start layering images easily onto the card...




I love the negative effect with outlined shape detail that the technique of using dye stain infusions with stencils provide when using a wet background...I thought I would integrate stencils as a part background and then add stamped details for focal points...here are the colours I chose to go with Mags Woodcock's designs.


I started by playing around with the products I had chosen to get a feel of how they might work together, and then on a 3d shape...I made a quick prototype to check my measurements worked ok then made a sturdy card template to mark out the shapes onto 300gsm card to create a couple of cones... The compass was set to 80mm and 180mm using the same pivot point to give me a jug sleeve of 100mm in height.  I used a 90* angle to get my cone angle...and added a 12mm glue strip to the end, and a thin rectangle of 150mm x 14mm for the handle.


I used PaperArtsy Mattint ASH to coat the whole cone and rectangle area using a wide flat brush...I love the finish and the transparency of the Mattints.



I used a dry sponge and PaperArtsy Stone Fresco Finish chalk acrylic through PS516 to create the heart details...I masked off the middle section on the stencil to avoid putting any unwanted shapes on my cone.


Then used the group of 000's from stamp set EMW004 to begin adding texture to some of the edges of the cone using Ranger waterproof Archival black ink...I thought that this would be ideal to use around the infusions as it would not react with the water...little did I know how it would react to something later on in the project that threw me sideways...more of that later!


I wet the card and sprinkled a little of a bit jaded Infusions Dye Stain and worked it in using a wet brush...


I held the stencil into the wet area and allowed the stain to pool into the edges of the stencil shapes.  I was working on two cones at the same time and so here I am adding a few detailed areas onto the second cone layout which was also coated in ASH Mattint...


I also created a strip of card using the same a bit jaded Dye stain Infusions and stencil PS517 which would later be used as a decorative strip and a handle.




I then started using the wet stencil and Infusions in between the stencilled and stamped areas...


I painted some of the little 000's with PaperArtsy Pine Grove Fresco Finish chalk acrylic and stamped LOVE once the infusions had dried using a very fine brush..


After stamping some of the other designs onto blank tissue PT10 and painting on their reverse using PaperArtsy Olive, Pine Grove and Blood Orange Fresco Finish Acrylic, I used a wet brush to separate the stamped and painted images by gently tearing the wet lines to give me feathered edges ready for smooth glueing.


Before I used Liquitex gel mat medium to stick the dried tissue images down, I used a quick spray of fixative over the infusions so that they did not react with the wet glue.


This is where I foolishly did things in the wrong order on one of the jug sleeves!!! Note to self...do NOT use fixative over stamped images...use it over the infusions only.  The waterproof ink reacts to the chemical in fixative and will promptly bleed and smudge...


It was an "eeeek! oh no no no no!!" moment closely followed by an "okay...you've got this...all is not lost and you do not need to panic...you can remedy this"...

I rescued the said piece by dabbing it and drying it off with my heat gun and using gesso to cover the smudged stamped areas...I love using gesso and so I felt quite comfortable with this schoolgirl error. Once the gesso was dry, I pooled some more of the A Bit Jaded dye stain Infusions on and using the same technique as earlier and stencil PS516 some new texture was created.


Using some of the painted stamped tissue and further stamping, then creating the rectangle piece 150mm x 14mm the jug was now ready to be cut out and assembled along with the other one.


By gently working your card into a more rounded shape it makes gluing it into a cone easier.


Once the cone was glued, glue the handle onto the seam.  Gently pinch the opposite side to create the jug spout.



Glue the handle towards the base of the jug...you can make the handle to your preferred length, including gluing it to the underside should you wish to...then slip the jug sleeve over the spice jar.



These cute little jug sleeves fit perfectly over spice jars so you can use dry things in them as well as being able to use them to hold water and use them for a table vase with fresh flowers...I think they look great with some of my brushes in...perfect on your art desk, or a great gift too!
 



The little silver brad to the handle of this one...



I do hope this may have inspired you to have a go...I shall pop a downloadable template on my website for those who find using a compass tricky...or want to speed the template bit up ;) Do let me know what you may use your jug sleeve for if you create one...

until next time...much love Floss x x x




Spaces are currently available for the following in person classes in Hellingly, East Sussex, UK

28 October 2026: 9.15am - Gel Plate Collagraph - 3.5hrs
30 October 2026: 10.15am - Mixed Media birds - 5.5 hrs
27 November 2026: 10.15am - Creative wellness - 5.5hrs

I shall be squeezing a jug sleeve class in at the start of November...

Wednesday, 15 April 2026

ATC's in Series with Seth Apter stamps {by Floss Nicholls}



Hello everyone, Floss here with you today...

Would you believe, of all the years that I have been creating mixed media...or art in general even, that I have never made a batch of ATC's?! Today I changed that and made some in a series using Seth Apter rubber stamps.






The first thing I did was mark out my paper and added washi tape to give me a grid which left me with a clean white 3mm border all round the ATC card. I used a standard playing card size. I then used a palette knife to add PaperArtsy Seaglass acrylic to areas of the grid.


Closely followed by gesso onto some areas over and clear of the Seagrass and let that dry before sprinkling infusions onto newly wetted areas...


I worked it with a large watercolour brush to spread the colour...and leave puddles.


 

I used one of the stamps from the Seth Apter set ESA49 to stamp text to cover more than one ATC card so that only parts of the stamp were visible on a few of the cards. 


I did the same kind of positioning with the circles stamp from the Seth Apter set ESA50, but instead of using ink, I painted the stamp with PaperArtsy's Blood Orange Acrylic to bring some contrast colour in.  



And again using the feather leaf shape stamp using ESA49 and Pine Grove Fresco Finish Acrylic.
 

The long thin shape worked beautifully across two cards as well as the length of one card...it really did not matter that it went over the taped borders as I would be peeling them off at the end.



I used opaque vanilla WOW embossing powder for extra details.  I used parts of the rubber stamp cross as well as whole crosses from the Seth Apter set ESA49 on the cards.  I heat set the powder making sure all the powder had melted.
 

I felt like some of the embossed words needed something more... 


and so I decided to use my palette knife to smear PaperArtsy Fresco Finish Squid Ink Acrylic over them...
 

I thought this made the words 'pop' a little more.



Once all the embossing and stamping was completed I was able to remove the washi tape...some of which I would keep for another project as it had some great textures on it!


I really liked how using the tape separated and spaced the design elements leaving a crisp edge which is very unlike me.  I usually favour ripped or overspill edges! 


Rather than using a guillotine or paper strimmer I decided to rip the borders against a metal rule.  I tested which way to rip first so that I had the 'cleaner rip edge' I found that pulling the card image part worked best for my preferred outcome.




After I had separated the cards, I rounded the corners, edged finished them and finally added some of the 'squiggly lines' from stamp set ESA49 and embossed them using Opaque vanilla Wow embossing powder.





Well that's it for now...

Much love,
Floss x x x

If you are in the UK somewhere near East Sussex then you'll find me in my workshop as I have a few mixed media classes coming up.