Wednesday, 24 July 2013

Darcy Wilkinson Project #3 Garden Party Part 2 ....

"Did the projects yesterday get you in the mood for a party? It is all looking pretty, but there is something important missing... cake! Let's make something colourful for the cakes".

I took an A3 sheet of paper, put my glass cake stand onto it and drew around. I then added on another inch and drew another circle. Now between the two circles I marked out triangles, all the way around. These are painted with Fresco Paints, then decorated with dots of a contrasting colour. Cut out just the triangles, up to the inner circle.



Once all the paint was dry I doodled with black and white this makes this cake stand trim match in with the bunting from yesterday. If you want to make this more durable I suggest covering it with clear sticky back plastic.


So now we have a pretty cake stand, lets make the cupcakes more interesting too.
I took some plain white paper doilies, and using a compass I removed the middle.


 
I then cut the remaining outer part of the doilies in half...

 
... and then trimmed off about an inch from one end. These are now the perfect size to wrap around my cake cases.


Next I got out my Gelli Plate and some stencils and using only "Translucent" Fresco Paints I built up a few layers. You do need to be careful and not let the doilies get over wet as they can tear. Once dry I glued them to plain cartridge paper. This hides the painty backs, keeps paint from being near the food, and also makes the colours of the paint pop more.



I then cut them out, curled them around and glued the ends with about an inch overlap. I can't wait to pop some cakes into these. 


Of course the guests will want to take a cake home, so we need some pretty cake boxes. I measured my cake cases and first off made the insert that will hold the cake.


You can see it is just a square with a hole in the centre, the edges are folded and snipped at the corners. Glue the corners under the sides, then you can measure again and work out what size your box needs to be.

The stand should fit in snugly, but leave enough space above for the frosting on the cake.
I cut a hole in the front 'door' and added a piece of acetate.



Here you can see it all put together.


Now you have a blank box and you can go to town with decorating. I had some shimmery inked card left over from the invitation. I stamped lots of JOFY flowers on that card, cut them out and covered the cake box. 


I added a doodled line around the edges, and stamped a message for the top.


Finally I wanted to make a centre piece for the table. I thought about a vase of flowers, this led me to think about a metal pot of flowers. I wasn't sure how the Fresco's would work on metal, so I went in search of one. Of course all the ones I had seen in the shops had disappeared when I needed one, so I ended up with a watering can! It had a decal image on one side, this was easily removed with a little rubbing alcohol.


I then sanded the whole thing, the red paint was quite glossy, so sanding it gave me a bit of a key to add new paint. I wanted my top colours to be bright so I first applied a coat of Gesso.



I then selected my colours.. This is the order in which I used them. I started at the base of the can with dark green, moved up through the greens to the yellow. I dabbed each colour on with a sponge, this made them very easy to blend so there are no harsh lines. From the yellow I moved into the sky colours, ending with the darkest blue up near the top rim of the can. 


Once the paint was dry I then sponged on a little Snowflake to create fluffy clouds. At this point I was so pleased with the result, the Fresco Paints are so delicious and blend so beautifully. 


I then stamped some JOFY flowers onto scrap paper, and using BluTac I put them on the can ,playing around till I liked the arrangement.






I then wasn't really sure how to get my flowers onto the can. I did think the best way would be to stamp onto tissue paper and glue those on. Given the curve of the can I thought that would be easiest. I stamped a load of flowers onto tissue, painted the backs, and then painted the fronts .….and within seconds of adding them to the can I hated them ...
so plan B. Would it be possible to stamp directly onto the can? How fiddly would it be, given the shape? As it turned out, it really wasn't that difficult at all. The flowers on the main part of the sides were easiest, I used PaperArtsy Flexi Blocks, and Archival Ink. Just stamping as normal. The images on the spout and those closest to the handle were a little trickier. I had to use the stamps without a block, and gently roll them onto the can. But I took my time, and they all stamped ok. 


I then painted all the flowers using Fresco Paints.. and finally added a coat of spray varnish. I absolutely love this little can now.


However it's not very tall, for a centrepiece, so I decided to add some height.
First I used the reverse stamping method to make two sides of a butterfly. By stamping onto a plain rubber block and then using that to stamp onto card, means I can get a mirror image of the butterfly stamp from HP1204.






I coloured the butterflies with ProMarkers and then cut them out and glued them back to back. 



I trapped a bamboo skewer between both sides of the butterfly, and then added Glossy Accents to each side. I dabbed some Sky onto a paper towel and used this to swipe the paint onto the stick.


Next I took some white tissue paper, folded up in a concertina style, the tissue paper is trimmed at the ends and formed into a ball. There are many, many tutorials on making tissue flowers on YouTube. As I formed the tissue ball, I glued a bamboo skewer inside. I then stood the skewer into plastacine so that I could colour the tissue. I wanted the colour to be quite delicate, so I added a little Fresco Paint to a spray bottle with more than double of water. I then sprayed the flower.



Spray from a distance, and do not oversaturate the tissue. Then allow to dry naturally, if you use a heat gun you will blow the petals together and they will stick. If any are clinging together, peel them apart very gently whilst damp, once dry they will not come apart.


Once dry, add a slightly darker paint to the spray bottle. Do not add any more water, just a few drops of the next shade. Again allow the tissue to dry, and then finally add a third darker shade, and repeat the process. This flower has three layers of paint sprayed, the lighter one mainly on the top and the darkest one is mainly underneath.


I then went on to make two other tissue flowers, painting them in the same way.



I put a large piece of plastacine inside the watering can, and then popped in the flowers and the butterflies ....



...and so the centrepiece is complete, and we can finally set the table.


I will be back tomorrow night with a certain friend you may have seen me Tweet about recently .... all will be revealed soon. In the meantime, if you have been inspired to play along with any of this weeks challenges, click HERE to share your work.
Leandra Says: You've certainly earned that glass of wine! What a fantastic week of posts so far, love how they all link in to each other. Now you can have the best picnic-parties all summer long!

Gillian Says: Outstanding .... I really would like to be inside your head when you come up with all these creative and unique ideas. I'm chuckling away at you taking all the Garden Party pieces and setting them up ... looks amazing. Were you swamped with uninvited guests lol.

Tuesday, 23 July 2013

Darcy Wilkinson Project #3 Garden Party Part 1....

"Summer has arrived! Yes really, let's make the most of it while we can. Let's have a party.
First off we need invitations. I decided to go with a card that would stand up, and opted to make a 'spring' type card. There are lots of tutorials online that will give you measurements and folding lines".


I folded the basic card using Smoothy White Stamping Card, then made pieces to stick on.
I sprayed some Adirondack Inks onto a craft sheet, spritzed with water and dragged more Smoothy Card through the ink. I then added a Shimmerz spray. Once dry I stamped flowers from JOFY 10.



I used a mix of Treasure Gold and Brush Bath to colour in the flower heads.
I then sprayed some more card with ink and dabbed it with the "criss cross" stamp from JOFY 10, to add patterning into the ink. Once both these pieces were dry I attached them to the basic spring card.



Here you can see the back of the card, this is where I stamped the words Who,What,Where,When...


Then I took the butterfly stamp from JOFY 11, I stamped it once onto Smoothy Card, and then again onto a plain block stamp. Then I stamped the block onto the card. This gives me a mirror image. You must use really juicy ink for this method.



I cut both butterflies out and then pieced them together to make one whole butterfly.


I coloured the butterfly with Fresco Paint, and added it to the card with a dot of silicone glue.


The shimmer from the spray and the Treasure Gold is lovely, subtle but effective.


Next we need some name cards for the table, so that everyone knows where to sit. I just used leftovers from the invitation, and made these in just a couple of minutes.


Now lets decorate the garden with some bunting ... I cut some large triangles from Smoothy White Stamping Card.


I painted each one a different colour using Fresco Paints, then I used a ribbon slot punch to add holes along the top edges.


I added stencilling in a contrast colour, then finished each one with doodling in black and white .


Finally I thread them onto a length of ribbon.

 

Now we are getting somewhere and it is all looking fine. The table cloth is laid out, but being
England it can get a little breezy and we don't want the table cloth blowing away.
so... a quick trip to the beach to find some flattish stones.. first off give them a coat of Snowflake so that your top colours will be bright and true.


Sketch out some cute animals...if this scares you then copy one from a child's colouring book.



Start adding colour using Fresco Paints..it really is as simple as blocking in shapes. Once you are done add a coat of gloss medium to seal them and prevent the paint chipping off.


So now we can pop a lil stone animal at each corner of the table cloth and it won't blow away. 

What is a party without a gift to unwrap, I am sure it must be someone's birthday...

Take some regular brown parcel paper. Add some roundish splodges of paint, I did these free hand, there is no need for them to be perfect circles. Once the paint dries, add some flower stamps from the JOFY range.


Continue adding paint splodges and flower stamps, then fill in the gaps with text and leaves.


Every gift needs a gift tag right? Using a Kraft Tag as my base,I then put some Snowflake and water into a spray bottle and sprayed the tag .


I then used Mermaid and Beach Hut and the mini circles stamp from JOFY 9 to cover the tag, followed by a flower stamp from that set stamped in Black Archival Ink.



I then stamped other JOFY flowers onto Smoothy White Stamping Card and coloured them using Adirondack Inks.

   
They were then cut out and attached to the tag..


So now we have pretty paper and a tag to wrap up a gift..


Finally today, a little something fun for the table. I always think those white paper serviettes at picnics and parties are so boring, well lets make something fun to hide them away.
I started with this Wooden Birdhouse Substrate. Firstly I prised off the roof.



I then painted it with Irish Cream, followed by Baltic Blue.


I sanded back some of the blue , and then stamped words from JOFY 11 onto tissue paper. I glued these all around the bottom ledge.


I then stamped up lots of the flowers,leaves and butterfly from the JOFY range, and coloured them all in with Aquamarkers. Once I had a whole pile of them I arranged them all over the house. Here is the back, the flowers are added to corrugate card.


And the left side... you can see more clearly here where I rubbed back the blue to reveal the Irish Cream colour underneath.



The right side...here I added buttons to the flowers.


And finally the front. The paper serviettes are folded inside in a Z formation, so that when one is pulled out through the hole, the next one starts to come out ready.


It's looking grand so far, come back tomorrow to see the rest of the decorations.
In the meantime, why not get your children involved, perhaps painting stone pets or making
bunting. If you don't fancy using the birdhouse for a picnic you could fill it with tissues for the
bedroom. Make something bright and summery to celebrate our little bit of sunshine.


Leandra Says: FLIPPING 'ECK. I've lost track of the number of things you've made already. Loving the animal stones, the bug and the turtle were faves here! But also struck me that the smoothy card takes all the colours so beautifully, water-wet sprays, damp treasure gold, paint or markers, it copes with whatever you chuck at it! Finally, when i contacted you to do this gig, you said you were not really a stamper...but we've busted your butt! You know how to do mirror image stamping and EVERYTHING!!! The butterfly was brilliant! ..... what!! NO CAKES!!! sheesh!!

Gillian Says: I don't know where to start ... I love everything about this project Darcy. Your attention to detail is second to none. This is one party that I would love to attend. Bravo.

Monday, 22 July 2013

Darcy Wilkinson Project #2 Stickles Storage Bag....

"Here is this month's storage idea. Everyone loves a bit of glitter right...and Stickles happen to be a little bit addictive. Strangely enough I don't actually use them a lot, but I do love those little bottles of sparkly glee. For the longest time I have had them thrown in a small bag, all jumbled up, and it was never easy to find the colour that I wanted. Also these bottles really need to be upside down, so that the glitter glue is at the nozzle end and ready to come out. So a solution was needed that would keep the bottles upside down, and in place".

A while ago I went to a crop, and my friend Fiona was using an old cosmetic bag for her
stickles....ohh wow genius! I knew immediately that I wanted to make one. So many thanks to Fiona for the idea. I gathered my bottles, measured the heights and the area needed, and messed about with paper shapes till I had a pattern that I thought might work.

I then cut my pieces from Calico, this was then gessoed to make it stiffer and easier to accept the stamping and paint. Here we have base and lid, two pieces for a handle. A long piece to go around the sides, a smaller piece for the back, and two skinny bits for trim.


Now to choose a colour scheme. Using my tags from yesterday I selected these two that I thought would look good.

I decided to go with the Stone, Bora Bora and Blood Orange combination. All pieces were painted with the Stone and Bora Bora.

I then took the PaperArtsy Tall Heart Die, and used it to cut a stencil. Using Blood Orange I stencilled the heart onto the lid.

The piece from the middle was made smaller and then turned into a smaller stencil. I used this medium heart twice on the back section.

I then had a happy accident, as I stencilled some of the paint seeped under the shape, so I took this kitchen scrubbie that I use for cleaning my desk. As the paint was already drying I scrubbed at it a little to remove the bits I didn't want, and by accident some of the paint from the middle of the heart came off too. I loved this 'worn away' look, and repeated it on the other hearts.

I used the Mini Dot Stencil to decorate the base of the bag, and again used the scrubbie to wear away some of the paint. You can see the difference in the before scrubbing and after.

Then I cut the same heart down again to make a third smaller stencil, this was used all along the side piece. Then scrubbed back the paint. The skinny pieces were stitched around cord and coloured with Blood Orange.

Now to add decoration. I stamped the text and the flower from HP1204 onto the lid and the back piece. 


Then I stamped the bubbles from Squiggly Ink Mini 15 onto the side piece.
 
I used French Roast to do the stamping. I also outlined each of the hearts with a scribbly line using a Mitsubishi Eye Pen
 

I then started to stitch it together. First I joined the two handle pieces, and attached the piping to the lid and the base.

Next I stitched the base to the side piece and the back piece, and added a long zip.

Finally I stitched on the lid and then painted on a layer of acrylic wax, this seals the surface, and makes it wipe clean.

I then filled it with upside down stickles. It measures about 6 inches long by 3 inches high, small and neat and perfect for taking to crops or art days. No more will I have odd bottles of glitter glue rolling around.

So now I have a handy, dandy little bag full of glitter glue. I love it so much I may make another one and actually use it for cosmetics!

Over to you, make yourself a piece of painted storage. It doesn't have to be fabric, you could easily turn a plain old box into very pretty storage for your workspace.

To play along with any of my challenges this week, click HERE to upload/share your project.

Leandra Says: The scrubbie acts the same way as a sanding block on paper! How cool was that accident!! I also love how you gesso your fabric and it acts as a stiffener, same for the wax layer on top! You are one helluva smart cookie Darcy!

Gillian Says: Oooo really like the distressed look to the painted hearts from your "happy accident" ... who knew. Another great storage idea Darcy, thanks for sharing how to create our own little custom bag.