Tuesday 1 December 2009

Ohhhh { Love these metal birds}

 Before we start...A few words on the rugby...
If you were following me on twitter (@paperartsy) the other weekend you would have seen my blow by blow account of the New Zealand All Blacks playing the English. Yay to the AB's. and yay that Mark and I were able to go along to watch with some other kiwi friends. Getting tickets to go to Twickenham is never easy for games like this, so we got them through the New Zealand Rugby Union verified by our kiwi passports. A great method as the section of the stadium we were in was all black too, so that made it even more fun! Plus a try that was scored (AB's) happened in the corner right in front of where we sat, so we were up and out of our seats with excitement!. We had a great spot: the higher stands protected us from the wind and rain, and the corporate "boxes" we just behind us, so we had the same view as them but way more fun! And of course the icing on the cake was the win.

The best part of rugby is the freindly atmosphere. When the poms scored we clapped, and when we scored they clapped...very sporting of us all and exactly how it should be....oh and the TV ref comes in very handy too!! Fair play all round makes for a great event. Had a few laughs on the train on the way back with other supporters from both sides.  Very very enjoyable.

Spinach Pie Success...
Oh and Patricia emailed me last weekend to say she tried my Spinach pie recipe, and her family loved it...that was funny...I know I put the recipes up there for people to try, but didn't think you actually would! SO I may have to put something else up there soon if you are liking that additional feature! lol Really tickled me that.3 bird roast for Xmas coming soon!!

Gift Certificates......

Mark has spent some time crating a series of VERY cool looking gift certificates. These are perfect for you to give firends or family vouchers that can be redeemed online, over the phone or as a postal order. Check them out here.

Back to the metal working....


After being out and about at a few shows in the last couple of months, I seem to get loads of emails from peeps asking me how I did this that or whatever, or how do they get started, usually that they don't remember a thing of what I demoed and want a blow by blow summary. lol. The shows over here like the NEC are absolutely massive. You are doing well to get around all the stands in a day, and you see soooo much thatit can be a bit of a brain drain. So thanks for taking the time to email and ask for help or inspirational ideas and reminders.


This blog is your first port of call. I do try to put up online the samples I made at the shows and give instructions of how they were made. That way, if you were stood watching, you can remember more easily how it was made. This works well until stuff "walks" off the desk....or people poke your samples so the metal gets crushed before the glue supporting it has set. 

Often I come up with new ideas while demoing, and this time, I had a great idea with some of the bird stamps and the little chipboard arches, and it was all looking awesome, but before the filler had set up, nearly every time I would go to show the sample to the next bunch of people watching, and bang, the blimmin thing was all mangled.  So on the last day of the show i tried to make some samples and hid them so i could blog un-poked items. :-)

I am pretty forgiving - poking raised metal is probably something even I would do lol... I guess we must all have some innate desire to have to just test to see if the metal is supported/strong. And people stood there aren't to know that it's not set hard. The drying process for fillers can be 24 hours, so usually the stuff on my desk is at some stage of drying out, but it certainly isn't fully set.


So let me show you what I was up to. If people are interested in how to stretch metal, then the samples above (fleur de lis) is a classic I do a lot, or maybe I might use a small flower, and stamp with a section that would look good puffed out will work, start with a simple design. 


The process is the same. Here is the same idea using the row of birds from SITT2...love that stamp(above) Or with a dragonfly stamp...this one is from the Squiggly Mini #13 .







  1. Substrate. Choose a substrate to work on (this is a mini chipboard arch -we have several new chipboard shapes going online this week) and trace the outline onto a piece of metal and cut out. 
  2. Stamp. Stamp the image onto silver, copper or coloured metal in the position you want with stazOn black ink and dry.
  3. Outline. Use a teflon pointed tool to gently outline the stamped design on the front. Lean on a wad of paper for this.
  4. Puff with paperstump. Flip the metal over, and on the back you will clearly see the outlined shapes. Put the metal onto a soft mat, and use a small paper stump in a circular motion to start puffing the metal inside the design lines. You might find the metal is resistant to you initially, then suddenly the warmth from the friction kicks in and you will feel the metal much more willing to oblige. Don't stop, keep puffing - you need to gradually stretch the metal.
  5. Refine on acrylic mat. Once you have the image puffed out to the depth you like, flip the metal over (puffy side up) and place it on an ACRYLIC MAT. People forget this bit and its the most important. You need to tidy up all the other bits of metal surrounding the puffed design that got mangled or stretched in the process. Use a large paper stump to gently flatten all the areas up to the edges of the stamped design. Don't press hard. Gradually encourage it to do what you want and again it will eventually play ball. At this point you can also place your refine metal back onto a wad of paper, and gently use a small fine perforated dot tool to outline the birds.
  6. Filling Metal. Now you need to fill the metal to support the puffed section. You need a product that will set up hard. Not silicone glue which is a soft flexible glue, even when dry.  You need to use either a glue or a poyfiller type product that will set hard. I use glossy accents for small areas, or polyfilla (plaster-like) for larger areas. There are many polyfillers out there, and some are more lightweight than others...which is good for cards that get posted...so muck about and do some tests to see which products you like the best. Apply the product to the recess and let set overnight. Cut a piece of humungo the same size as the metal. Stick the humungo tape to the substrate, then stick the metal to the humungo. Run a patterned wheel around the edge like a herringbone wheel to finish the edge nicely.
  7. Stamp again. You can add more flourishes, words etc to your piece, and use texture wheels around the edge.

These simple tag-shaped pieces make great tags for presents, and of course you can write a message on the back...do that before you stick the metal down for ease, or if you forget, then place metal side down on a soft mat and then do your writing! The backs would look great with some rum and raisin papers on them!!

Oops...here's a poked one! grrrr...

...and a few more samples so you get the idea...note how once the metal is on the chipboard base, you can still outline the stamped lines as the chipboard with humungo tape is soft enough to accept lines made with a teflon pointy tool.

Love this sample below where part of a flower from SIEN2 or use SIEN4 for a larger one.


Here's one with a difference for those of you who want more of a challenge! Love the added colour which comes from the glimmer mists with a dab of paint underneath.
  1. Outline. Trace around the tag chipboard shape onto a sheet of silver metal with your pointy tool. Cut out
  2. Sand. Use your sanding block to sand the metal in both directions (horizontal and vertical) This will give the metal a stainless steel effect, and adds some 'tooth' to the shiny surface....love doing this before stamping in general...but don't do it to coloured metal ..all you will do is sand off the colour! LOL (you knew that already didn't you!!)
  3. Paint. Apply paint to the surface...if you want the glimmer colours to be rally strong, then use a pale kaisercolour like white, eggshell, antique white, blossom, coastal blue, or one of those really ligfht shades. Swipe a very small amount of paint on with Cut and Dry foam, and then wipe off the excess with a paper towel. You still want to see the shine of the metal.
  4. Glimmer. Paint and sanding the metal gives 'tooth' so that Glimmer mists can stick to the metal. So now you can choose 2 colours of glimmer to use on the metal. Spray Patina onto part of the metal and then dry. Next spray khaki on the remaining area and dry. If you spray loads, you will get 'watermark' type effects. It's a good idea to heat the metal with your heat gun first, and then spray while its hot, this helps the glimmer to dry faster.
  5. Stamp. Now stamp your birdcage image from SINM6 in archival jet black ink on top....DON'T use stazon....why? Because stazon is used onto smooth and shiny NON-POROUS surfaces (eg. metal, acetate, acrylic). We just added paint, and glimmer to the metal, so now you want to use Ranger's archival jet black ink or a black pigment like brilliance would also work. These will give a much better black colour onto the painted, glimmered surface.
  6. Emboss the image. Puff out the image as before, so outline the image from the front with a pointy tool, then flip onto the soft mat and puff out the birdcage from behind with a paper stump, or for a lage area like this the round teflon tool is perfect!. Carefully refine on an acrylic mat to flaten the surrounding areas, and to finish, use a fine dot perforated wheel around the edge of the birdcage if you wish.
  7. Fill the metal. OPTION A: Fill the recess with glossy accents.  You can also apply glossy accents to the rest of the metal, but only a small amount, and you need to smooch it about with your finger so you have a thin even layer. now stick the metal directly to the chipboard. OPTION B: Fill the recess with polyfiller. Let dry overnight. Cut humungo to fit the substrate and stick to the substrate. Stick the metal to the humungo.
  8. Stamp. Add more stamping to the edges of the piece or words like those from SINM6. Also edge the metal with a decorative wheel, like the diagonal. You can also sand the edges of the metal after using the wheel to make a nice frame.

OK so that's your lot for today ..plenty to be going on with... we are mega fast on shipping at the moment, everything is going out within 24 hours, so what are you waiting for!!!

Don't forget that Tim has started his 12 days of Xmas tags today too, so many ideas and techniques to look forward to. I loved his iwred ribbon idea on Tag 1..I'm off to do that with paper!

And please leave a comment with your thoughts on what you will do with these ideas! I love hearing about what you are up to!

13 comments:

Artyjen said...

Thanks so much for sharing those great pieces and the explanation! I'm hoping to somehow use a bit of metal work whilst playing along with T!m's tags! Using those lovely stamps I won from you of course!
xoxo

Burnice said...

Fabulous!

Burnice x

kjjc said...

very clear instructions. thanks Leandra

Anonymous said...

No excuse to start puffing now. The instructions are very clear and i like using the metal.
Margriet

Trish said...

Oh I love your puffed stamps! Great instructions, now I can add puffed metal to Tim's tag. Hmmmm....
Thank you for the inspiration!

Tontodollydog said...

Thanks to the Artsy Craft weekend in October I am a very confident puffer lol xx loving the examples

Julie Corfield said...

How dare someone push a puffed bit! That would make me mad - bloody cheek lol! Cool inspiration there Leandra :o) thanks x

P'tite Plume said...

It's fabulous! Thanks.

Andrea - Wales, UK said...

Fab instructions as always. Love the tiny paper stumps I bought off you for puffing. The birds are adorable. Thanks.x

massofhair said...

Tried this technique once a few months ago and it turned out fine but looked nothing like the ones you have pictured; off to try again.
Thank you for the detailed instructions and i agree with a couple of the other comments about adding some metal to T!m's tags:-)

Daria said...

Thank you for your detailed instructions. Your metal pieces are fabulous.

Lesley Edmonds said...

Thanks for the reminders on how to do this. It's easy to leave out a stage, and yes - it's usually the refining with the large paper stump that I forget! LOL!
Lesley x

PaperArtsy said...

Hi everyone. Thanks for your lovely comments. if you come back to this blog post, you will see I have edited it to embed a you tube video on puffing.

Check it out and LMK if it was helpful and your thoughts.

Thanks

Leandra